Introduction

The concept of file sharing is an option when a file is opened successfully. The option defines what is to happen if another process tries to open the same file should it work or fail.

In the .NET framework, the option is defined by the System.IO.FileShare enumeration. The Xceed.FileSystem.AbstractFile uses the enumeration with the OpenRead() and OpenWrite() methods as an optional parameter. Default values are available and can be changed at a global level.

In the world of SFtp, FileShare options are only supported in versions 5 and later of the SFtp protocol. When lower versions are used, like the very common version 3 that most servers implement, the FileShare values used by SFtpFile and silently ignored when opening remote files.

Default behavior

The default behavior of the component is allow sharing of files for both reading and writing. This means that no blocking is requested when opening remote SFtp files. This behavior is different than other FileSystem media like DiskFile for example where no sharing is allowed when opening a file for writing.

Some SFtp servers return errors when System.IO.FileShare options block reading and/or writing by other server processes when a file is opened. To prevent errors, blocking is not used by default by SFtpFile.

When writing files

Uploading opens SFtp remote files for writing and so uses the SFtpFile.DefaultAutomaticWriteFileShare property value.

If supported by the server, it is best practice to enable blocking for reading, writing and deleting when opening a file for writing. This way, it can be guaranteed that only a single process can write to a file at the same time. This is done by calling SFtpFile.SetDefaultAutomaticWriteFileShare method to FileShare.None.

The default automatic FileShare can be returned to its default value by calling the SFtpFile.SetDefaultAutomaticWriteFileShare method with null.

C#	Copy Code
// Set the write file share to block reading and/or writing by other processes when writing files SFtpFile.SetDefaultAutomaticWriteFileShare( FileShare.None ); // Uploading opens SFtp remote files for writing and so uses the DefaultAutomaticWriteFileShare property value localFolder.CopyFilesTo( remoteFolder, true, true );

Copy Code

// Set the write file share to block reading and/or writing by other processes when writing files
SFtpFile.SetDefaultAutomaticWriteFileShare( FileShare.None );

// Uploading opens SFtp remote files for writing and so uses the DefaultAutomaticWriteFileShare property value
localFolder.CopyFilesTo( remoteFolder, true, true );

VB.NET	Copy Code
' Set the write file share to block reading and/or writing by other processes when writing files SFtpFile.SetDefaultAutomaticWriteFileShare(FileShare.None) ' Uploading opens SFtp remote files for writing and so uses the DefaultAutomaticWriteFileShare property value localFolder.CopyFilesTo(remoteFolder, True, True)

VB.NET

Copy Code

' Set the write file share to block reading and/or writing by other processes when writing files
SFtpFile.SetDefaultAutomaticWriteFileShare(FileShare.None)

' Uploading opens SFtp remote files for writing and so uses the DefaultAutomaticWriteFileShare property value
localFolder.CopyFilesTo(remoteFolder, True, True)

When reading files

Downloading opens SFtp remote files for reading and so uses the SFtpFile.DefaultAutomaticReadFileShare property value.

If supported by the server, it is best practice to enable blocking for writing and deleting when opening a file for reading. This way, it can be guaranteed that only a single process can write to a file at the same time but allow for any number of processes to read from the file at the same time. This is done by setting the SFtpFile.DefaultAutomaticReadFileShare property to FileShare.Read.

The default automatic FileShare can be returned to its default value by calling the SFtpFile.SetDefaultAutomaticReadFileShare method with null.

C#	Copy Code
// Set the read file share to allow reading but block writing and deleting by other processes when reading files SFtpFile.SetDefaultAutomaticReadFileShare( FileShare.Read ); // Downloading opens SFtp remote files for reading and so uses the DefaultAutomaticReadFileShare property value remoteFolder.CopyFilesTo( localFolder, true, true );

Copy Code

// Set the read file share to allow reading but block writing and deleting by other processes when reading files
SFtpFile.SetDefaultAutomaticReadFileShare( FileShare.Read );

// Downloading opens SFtp remote files for reading and so uses the DefaultAutomaticReadFileShare property value
remoteFolder.CopyFilesTo( localFolder, true, true );

VB.NET	Copy Code
' Set the read file share to allow reading but block writing and deleting by other processes when reading files SFtpFile.SetDefaultAutomaticReadFileShare(FileShare.Read) ' Downloading opens SFtp remote files for reading and so uses the DefaultAutomaticReadFileShare property value remoteFolder.CopyFilesTo(localFolder, True, True)

VB.NET

Copy Code

' Set the read file share to allow reading but block writing and deleting by other processes when reading files
SFtpFile.SetDefaultAutomaticReadFileShare(FileShare.Read)

' Downloading opens SFtp remote files for reading and so uses the DefaultAutomaticReadFileShare property value
remoteFolder.CopyFilesTo(localFolder, True, True)

It is not necessary to test which version of the SFtp protocol is in use to change the FileShare options. If the protocol version does not support the FileShare options, the values are silently ignored.

Example

The following example shows how to change the default FileShare option values. It also shows what happens when a FileShare value isn't supported by the SFtp server and what an application can do to remedy the situation.

C#	Copy Code
void Example() { using( SSHClient ssh = new SSHClient() ) { ssh.Connect( host ); ssh.Authenticate( username, password ); using( SFtpSession sftp = new SFtpSession( ssh ) ) { /* FileShare options are only supported in versions 5 and later of the SFtp protocol. When lower versions are used, like the very common version 3, the FileShare values used by SFtpFile and silently not used when opening remote files. / // If the SFtp server run version 5 or later of the SFtp protocol if( sftp.SFtpServerProtocolVersion >= 5 ) { / In this example, we test the protocol version number, but this is only done to show you can. FileShare values are simply ignored when the protocol version does not support them. / } // Set the write file share to block reading, writing and deleting by other processes when writing files SFtpFile.SetDefaultAutomaticWriteFileShare( FileShare.None ); // Set the read file share to allow reading but block writing and deleting by other processes when reading files SFtpFile.SetDefaultAutomaticReadFileShare( FileShare.Read ); AbstractFolder sourceFolder = new DiskFolder( @"D:\SomeFolder" ); AbstractFolder destinationFolder = new SFtpFolder( sftp ); FileSystemEvents events = new FileSystemEvents(); // Handle the ItemException event to handle issues with file sharing events.ItemException += new ItemExceptionEventHandler( OnItemException ); / We will upload files here. Uploading opens SFtp remote files for writing and so uses the DefaultAutomaticWriteFileShare property value. / // Upload the contents of the local folder to the SFtp server sourceFolder.CopyFilesTo( events, null, destinationFolder, true, true ); } } } static void OnItemException( object sender, ItemExceptionEventArgs e ) { // Express the exception as a UnsupportedFileLockException object UnsupportedFileLockException unsupportedFileLockException = e.Exception as UnsupportedFileLockException; // If we did indeed get a UnsupportedFileLockException if( unsupportedFileLockException != null ) { / The SFtp server cannot make the locking guarantee for the FileShare value used in the operation. / // The exception message contains the FileShare value used that is not supported Console.WriteLine( unsupportedFileLockException.Message ); // The FileShare value can be found in the FileShare property of the exception Console.WriteLine( "FileShare value used that is not supported: {0}", unsupportedFileLockException.FileShare ); / You can always revert to the default FileShare behavior which does not ask to lock the file */ // Revert to the default write file share value SFtpFile.SetDefaultAutomaticWriteFileShare( null ); // Revert to the default read file share value SFtpFile.SetDefaultAutomaticReadFileShare( null ); // Retry the operation e.Action = ItemExceptionAction.Retry; } }

Copy Code

void Example()
{
  using( SSHClient ssh = new SSHClient() )
  {
    ssh.Connect( host );
    ssh.Authenticate( username, password );

    using( SFtpSession sftp = new SFtpSession( ssh ) )
    {
      /* FileShare options are only supported in versions 5 and later of the SFtp protocol.
      When lower versions are used, like the very common version 3, the FileShare values
      used by SFtpFile and silently not used when opening remote files. */

      // If the SFtp server run version 5 or later of the SFtp protocol
      if( sftp.SFtpServerProtocolVersion >= 5 )
      {
        /* In this example, we test the protocol version number, but this is only done to
        show you can. FileShare values are simply ignored when the protocol version
        does not support them. */
      }

      // Set the write file share to block reading, writing and deleting by other processes when writing files
      SFtpFile.SetDefaultAutomaticWriteFileShare( FileShare.None );

      // Set the read file share to allow reading but block writing and deleting by other processes when reading files
      SFtpFile.SetDefaultAutomaticReadFileShare( FileShare.Read );

      AbstractFolder sourceFolder = new DiskFolder( @"D:\SomeFolder" );
      AbstractFolder destinationFolder = new SFtpFolder( sftp );

      FileSystemEvents events = new FileSystemEvents();
      
      // Handle the ItemException event to handle issues with file sharing
      events.ItemException += new ItemExceptionEventHandler( OnItemException );

      /* We will upload files here. Uploading opens SFtp remote files for writing
      and so uses the DefaultAutomaticWriteFileShare property value. */

      // Upload the contents of the local folder to the SFtp server
      sourceFolder.CopyFilesTo( events, null, destinationFolder, true, true );
    }
  }
}

static void OnItemException( object sender, ItemExceptionEventArgs e )
{
  // Express the exception as a UnsupportedFileLockException object
  UnsupportedFileLockException unsupportedFileLockException = e.Exception as UnsupportedFileLockException;

  // If we did indeed get a UnsupportedFileLockException
  if( unsupportedFileLockException != null )
  {
    /* The SFtp server cannot make the locking guarantee for the FileShare value used
    in the operation. */

    // The exception message contains the FileShare value used that is not supported
    Console.WriteLine( unsupportedFileLockException.Message );

    // The FileShare value can be found in the FileShare property of the exception
    Console.WriteLine( "FileShare value used that is not supported: {0}", unsupportedFileLockException.FileShare );

    /* You can always revert to the default FileShare behavior which does not ask to lock the file */

    // Revert to the default write file share value
    SFtpFile.SetDefaultAutomaticWriteFileShare( null );

    // Revert to the default read file share value
    SFtpFile.SetDefaultAutomaticReadFileShare( null );

    // Retry the operation
    e.Action = ItemExceptionAction.Retry;
  }
}

VB.NET	Copy Code
Private Sub Example() Using ssh As New SSHClient() ssh.Connect(host) ssh.Authenticate(username, password) Using sftp As New SFtpSession(ssh) ' FileShare options are only supported in versions 5 and later of the SFtp protocol. ' When lower versions are used, like the very common version 3, the FileShare values ' used by SFtpFile and silently not used when opening remote files. ' If the SFtp server run version 5 or later of the SFtp protocol If sftp.SFtpServerProtocolVersion >= 5 Then ' In this example, we test the protocol version number, but this is only done to ' show you can. FileShare values are simply ignored when the protocol version ' does not support them. End If ' Set the write file share to block reading, writing and deleting by other processes when writing files SFtpFile.SetDefaultAutomaticWriteFileShare(FileShare.None) ' Set the read file share to allow reading but block writing and deleting by other processes when reading files SFtpFile.SetDefaultAutomaticReadFileShare(FileShare.Read) Dim sourceFolder As AbstractFolder = New DiskFolder("D:\SomeFolder") Dim destinationFolder As AbstractFolder = New SFtpFolder(sftp) Dim events As New FileSystemEvents() ' Handle the ItemException event to handle issues with file sharing AddHandler events.ItemException, AddressOf OnItemException ' We will upload files here. Uploading opens SFtp remote files for writing ' and so uses the DefaultAutomaticWriteFileShare property value. ' Upload the contents of the local folder to the SFtp server sourceFolder.CopyFilesTo(events, Nothing, destinationFolder, True, True) End Using End Using End Sub Private Shared Sub OnItemException(ByVal sender As Object, ByVal e As ItemExceptionEventArgs) ' Express the exception as a UnsupportedFileLockException object Dim unsupportedFileLockException As UnsupportedFileLockException = TryCast(e.Exception, UnsupportedFileLockException) ' If we did indeed get a UnsupportedFileLockException If unsupportedFileLockException IsNot Nothing Then ' The SFtp server cannot make the locking guarantee for the FileShare value used ' in the operation. ' The exception message contains the FileShare value used that is not supported Console.WriteLine(unsupportedFileLockException.Message) ' The FileShare value can be found in the FileShare property of the exception Console.WriteLine("FileShare value used that is not supported: {0}", unsupportedFileLockException.FileShare) ' You can always revert to the default FileShare behavior which does not ask to lock the file ' Revert to the default write file share value SFtpFile.SetDefaultAutomaticWriteFileShare(Nothing) ' Revert to the default read file share value SFtpFile.SetDefaultAutomaticReadFileShare(Nothing) ' Retry the operation e.Action = ItemExceptionAction.Retry End If End Sub

VB.NET

Copy Code

    Private Sub Example()
      Using ssh As New SSHClient()
        ssh.Connect(host)
        ssh.Authenticate(username, password)

        Using sftp As New SFtpSession(ssh)
'           FileShare options are only supported in versions 5 and later of the SFtp protocol.
'          When lower versions are used, like the very common version 3, the FileShare values
'          used by SFtpFile and silently not used when opening remote files. 

          ' If the SFtp server run version 5 or later of the SFtp protocol
          If sftp.SFtpServerProtocolVersion >= 5 Then
'             In this example, we test the protocol version number, but this is only done to
'            show you can. FileShare values are simply ignored when the protocol version
'            does not support them. 
          End If

          ' Set the write file share to block reading, writing and deleting by other processes when writing files
          SFtpFile.SetDefaultAutomaticWriteFileShare(FileShare.None)

          ' Set the read file share to allow reading but block writing and deleting by other processes when reading files
          SFtpFile.SetDefaultAutomaticReadFileShare(FileShare.Read)

          Dim sourceFolder As AbstractFolder = New DiskFolder("D:\SomeFolder")
          Dim destinationFolder As AbstractFolder = New SFtpFolder(sftp)

          Dim events As New FileSystemEvents()

          ' Handle the ItemException event to handle issues with file sharing
          AddHandler events.ItemException, AddressOf OnItemException

'           We will upload files here. Uploading opens SFtp remote files for writing
'          and so uses the DefaultAutomaticWriteFileShare property value. 

          ' Upload the contents of the local folder to the SFtp server
          sourceFolder.CopyFilesTo(events, Nothing, destinationFolder, True, True)
        End Using
      End Using
    End Sub

    Private Shared Sub OnItemException(ByVal sender As Object, ByVal e As ItemExceptionEventArgs)
      ' Express the exception as a UnsupportedFileLockException object
      Dim unsupportedFileLockException As UnsupportedFileLockException = TryCast(e.Exception, UnsupportedFileLockException)

      ' If we did indeed get a UnsupportedFileLockException
      If unsupportedFileLockException IsNot Nothing Then
'         The SFtp server cannot make the locking guarantee for the FileShare value used
'        in the operation. 

        ' The exception message contains the FileShare value used that is not supported
        Console.WriteLine(unsupportedFileLockException.Message)

        ' The FileShare value can be found in the FileShare property of the exception
        Console.WriteLine("FileShare value used that is not supported: {0}", unsupportedFileLockException.FileShare)

        ' You can always revert to the default FileShare behavior which does not ask to lock the file 

        ' Revert to the default write file share value
        SFtpFile.SetDefaultAutomaticWriteFileShare(Nothing)

        ' Revert to the default read file share value
        SFtpFile.SetDefaultAutomaticReadFileShare(Nothing)

        ' Retry the operation
        e.Action = ItemExceptionAction.Retry
      End If
    End Sub

Business Suite

Ultimate Suite

Introduction

Default behavior

When writing files

When reading files

Example